Clamp Adapters With male thread

Clamp Adapters clamp adapters come in a variety of sizes and threads. they require a 40 + 0 - 1 mm hole in the header pipe. for disc difusser thius hole must point exactly upwards. short tube difussers ( max. 560 mm length ) have to be levelled within 5 mm at the ends, so both 40 mm holes must be aligned horizontally. all clamps come with a cable-tie-like mounting aid freeing your hands during installation. clamps are installed in pairs. you need two threaded ones ( 1" male) for a pair of tubes or one threaded and one blind one for a single tube. disc require one blind clamp. to close an unneeded hole in the header you may use two blind clamps with additional flat seals. clamp adapters 90N are especially for 90 mm headers with existing openings of about 15 mm. you may connect any jetflex disc difusser with a pair if 90N-clamps. the threaded clamp adapter easily accomodates our check-valve giving you full compatibility, if necessary. Clamp adapter with male thread - clamp adapter 114.3 with 1" male thread - clamp adapter 110 with 1" male thread ( material : PP20% GF/ SI/ SS) Black